新疆鋼閘門裝置與環境溫度的要求，裝置時一定要堅持根底布置立體程度180°，啟閉機底座與根底布置立體的接觸面積要到達90%以上，螺桿軸線要垂直于閘臺上橫梁的程度面，要與閘板吊耳孔吻合垂直，防止螺桿傾斜，形成部分受力而損壞機件。
手電兩用啟閉機構造由機殼、機蓋、支架、螺母、螺桿、壓力軸承、螺桿、蝸桿、蝸輪手搖柄、電機、電器等組成。手電兩用啟閉機采用蝸輪，蝸桿變速螺母旋轉，使螺桿上下運動，平安功能高，手電兩用啟閉機具有扭矩維護和行程限位雙重防護措施，操作方便，可完成遙控和現場操作，單臺控制和集中控制等多種控制方式。
在載荷運轉一段工夫后，要停止頤養，把機內新機件磨擦發生的金屬沫特別是螺桿、螺母、渦輪、渦桿，要輕洗潔凈，涂上光滑油，密封嚴實，持續運用。The requirement of Xinjiang steel gate device and environmental temperature must insist on the stereoscopic degree of the base arrangement 180 degrees, the contact area between the base of hoist and the stereoscopic arrangement of the base should reach more than 90%, the screw axis should be perpendicular to the degree plane of the cross beam on the gate platform, and should be in accordance with the vertical of the gate hanger ear hole, so as to prevent the screw from tilting and forming part of the mechanical force to damage the machine parts. The utility model is composed of a housing, a cover, a bracket, a nut, a screw, a pressure bearing, a screw, a worm, a worm wheel handle, a motor, an electric appliance, etc. The dual-purpose hoist adopts worm wheel and worm variable speed nut to rotate, which makes the screw move up and down. It has high safety function. The dual-purpose hoist has dual protective measures of torque maintenance and travel limit. It is easy to operate and can complete remote control and field operation, single control and centralized control. After the load runs for a period of time, it is necessary to stop taking care of itself. The metal foam, especially the screw, nut, turbine and scroll, which occurs when the new parts of the machine are friction, should be cleaned and cleaned lightly, coated with smooth oil, sealed tightly and used continuously.